深圳比亚迪戴姆勒新技术有限公司

冲压工艺工程师Stamping Process Engine

2013-10-29

投递简历 收藏

5年以上经验本科以上学历

岗位职责:

      1. Supplier Management 供应商管理
      Control die supplier, responsible for project timing, part quality and die quality, responsible from supplier method confirmation, countersign, manufacturing quality and schedule, responsible for organizing die pre-buyoff and final buyoff, until give die to stamping shop.
      对模具制造商实施项目管理,对项目进度和零件质量、模具质量全面负责,独立负责厂家的从工艺方案确认,图纸会签、制造质量和进度监控,组织负责模具预验收和终验收直到模具交付冲压车间。
      
      2. Press Part Management and Improvement 冲压件管理和改进
      Responsible for organizing tryout parts supply, optimize part quality and die quality, quality feedback, to pass part quality release and production release.
      负责组织落实试装供件工作,对零件质量和模具质量持续改进,质量反馈,最终通过零件质量放行和生产放行。
      To resolve the decided quality problems, put up measure and improve it to satisfy the productivity.
      针对部门内或后工序反映的确定的质量问题进行对策措施,并实施和验证,以满足生产要求。
      
      3. Status Reporting and Critical Topic Management 进度报告和关键问题管理
      Prepare and update status weekly regarding quality, cost, timeline together with BDNT stamping team, R&D, Quality department, die supplier and stamping shop.
      和冲压团队、研发、品质、模具制造商和冲压车间一起,每周定期准备并更新关于冲压件和模具质量、时间进度及费用的状态报告。
      Point out critical parts, dies and topics. Define measures together with BDNT stamping team, R&D, Quality department, die supplier and stamping shop. Escalate topics if necessary.
      指出关键的零件、模具及问题点并与冲压团队、研发、品质、模具制造商和冲压车间共同制定解决方法,并根据需要逐步升级。
      
      4. Change Management 变更管理
      Control change management process and keep transparency regarding cost and timeline, protect BDNT of unrightless cost and delay.
      管控变更管理过程,保证合理的变更费用及时间。
      Check change feasibility and quotation, disscuss and prepare agreement and approval with supplier and BDNT management.
      检查变更可行性和报价,与供应商讨论并准备相关协议和认可文件。

任职要求:

Education:Engineering Bachelor Degree and above (Material Forming and Control Engineering or Mechanical)
      工程类本科以上学历(材料成型及控制工程或者机械类专业)
      
      Experience:
      More than 5 years working experience in automotive company or big-size die maker design, process department.
      在汽车厂冲压部门或大型模具厂设计、工艺部门5年以上工作经验。
      
      Specific knowledge/skills:
      Good professional knowledge and practical experience in automobile stamping.
      在汽车冲压生产工艺方面有较好的专业知识和实践经验;
      
      Certain professional knowledge and practical experience in stamping die and equipment.
      熟悉冲压模具的结构和原理以及冲压设备方面的专业知识和实践经验;
      
      Familiar with stamping process preparation, has experience to make complex stamping part process method, drawing check and die tryout.
      熟悉冲压工艺准备流程,有编制复杂冲压件工艺方案、图纸审查和模具调试的经验;
      
      CET-4 above, skilled with Translation and interpretation.
      英语4级以上,笔译、口语熟练;
      
      Familiar with office software, skilled CATIA, UG, CAD.
      精通办公室各种应用软件,熟练操作CATIA、UG、CAD等设计软件;
      
      Strong ability to communicate, coordinate and decide, strong sense of responsibility.
      应具有较强的沟通、协调、判断能力,责任心强。 
      

工作地点:

深圳

直接应聘

比亚迪戴姆勒

公司地址:深圳

行业:轿车

规模: 500-1000人

相似职位

同地区职位